Faisal Steel is a leading manufacturing company and supplier located in Muscat, OMAN, which involves the provision of high-quality carbon steel products. Having a good reputation of being excellent, we supply tough, hard, reliable Carbon Steel DIN 17172 Pipes that meet the most demanding industry standards. Our products are used in a wide range of applications, such as in construction, oil and gas, and the transport industries. We at Faisal Steel ensure you get precision, quality, and full satisfaction from the solutions delivered to meet your needs.
FAISAL Steel, located in Muscat, Oman, stands out as a top manufacturer and supplier of premium steel products, including Carbon Steel DIN 17172 Pipes. Known for their precision, durability, and commitment to international standards, FAISAL Steel crafts pipes that ensure reliable performance even in the toughest industrial settings. These pipes are produced using cutting-edge techniques and rigorous quality control, guaranteeing consistent mechanical properties, precise dimensions, and a long lifespan. Carbon Steel DIN 17172 Pipes are perfect for high-pressure, high-temperature, and wear-resistant applications in the oil and gas, petrochemical, water treatment, and industrial sectors throughout Oman and the Middle East.
| Standards | DIN 17172 StE 360.7 Pipe |
|---|---|
| Welded Pipe Size | 5.0 mm – 1219.2 mm |
| Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| EFW Pipe size | 5.0 mm – 1219.2 mm |
| Pipe Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Tube Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Welded Tube Size | 6.35 mm OD To 152 mm OD |
| Length | Single Random, Double Random, Standard & Cut length Pipe & Tube |
| Tube wall thickness | 0.020″ –0.220″, (special wall thicknesses available) |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Application | Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube |
| Type | Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc |
| Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
| Form | Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc |
| End | Plain End, Beveled End, Treaded Pipe & Tube |
| Marking | All Tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| We can also cut, thread, and groove Tubes to meet your specifications | |
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
|---|---|---|---|---|---|---|---|---|---|
| max 0.22 | max 0.55 | 0.90 – 1.50 | 0.04 | 0.035 | – | – | – | – | – |
| Yield Strength | Tensile Strength | Elongation A5 min | |||
| MPa min | ksi min | MPa min | MPa min | ksi min | Percentage |
| 630 | – | – | 20 | ||
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Made primarily from carbon steel, these pipes have carefully regulated levels of carbon, manganese, phosphorus, and sulfur, striking a balance between strength, ductility, and toughness. Mechanically, they boast impressive tensile and yield strength, impact resistance, and durability under challenging conditions. Their excellent weldability and machinability, along with the option for heat treatment, make them ideal for critical piping systems where structural integrity and long-term reliability are crucial.
| Execution | Size Range | OD Tolerance | Wall tolerance |
|---|---|---|---|
| Hot-rolled Tube | OD – 80 mmOD > 80 mmWall < 12 mmWall – 12 mm | ± 0.4 mm± 0.5 % of OD | ± 0.7 mm± (5 % x wallthickness + 0.1 mm |
| Hot-rolled peeled tube | All sizesWall < 12 mmWall – 12 mm | #ERROR! | ± 0.8 mm± (5 % x wall thickness+ 0.2 mm) |
| Cold Worked tubecold-rolled or cold-drawn | OD < 40 mmOD 40 – 80 mmOD > 80 Wall Thickness < 6 mm Wall Thickness6 – 8 mm Wall Thickness > 8 | #ERROR! | ± 0.30 mm± 0.35 mm± 0.40 mm |
Carbon Steel DIN 17172 Pipes find extensive use in oil and gas pipelines, chemical plants, refineries, power generation, and water treatment systems. They are designed for both high-pressure and low-pressure applications, ensuring leak-proof and efficient fluid flow. Additionally, these pipes are utilized in industrial fabrication, construction, and infrastructure projects, providing corrosion resistance, operational safety, and lasting performance. Their strength, versatility, and reliability make them a go-to choice for engineers and industrial projects across Oman and the Middle East.
FAISAL Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Muscat, OMAN.
Copyright 2025 FAISAL Steel. All rights reserved
